How to ensure that the bucket teeth are correctly positioned and fixed?

To make certain an appropriate positioning and fixation of the bucket teeth, the following steps can be taken:
Determine the position and path of the bucket teeth: The bucket teeth must be regular with the outer contour of the bucket, the centerline of the bucket tooth need to be consistent with the centerline of the bucket, and the path of the bucket teeth must be at a positive perspective to the leading fringe of the bucket. Specifically, the bucket tooth may be constant to the bucket at an angle of 45 or 30 levels to improve excavation performance and reduce bucket tooth wear.
Select the suitable lock frame and lock pin: Install the lock body into the lock body housing hole, and installation the lock body non rotatably on the teeth seat; Move the bucket teeth and insert the nose of the tooth base into the inner cavity of the bucket tooth; The locking pin is inserted into the locking pin via hollow on one side of the bucket teeth and to start with placed to make sure that the concave slide is on the corresponding position of the elastic lock head; The locking pin penetrates into the pin hole and goes to the via hollow of the locking pin on the opposite facet. The elastic lock head moves along the concave slide to the side of the concave lock position, and the center segment of the locking pin is wrapped with the aid of the lock body. The pin ends at both ends of the locking pin are positioned in the thru hollow of the locking pin.

The rotational pressure is applied to the cease of the lock pin to rotate it at a certain perspective relative to the lock body: the elastic lock head is clamped into the concave lock position from the concave slide, and the lock pin and lock body are restricted, thereby solving the bucket tooth and enamel seats.
After the above steps are completed, the right position and fixation of the bucket teeth may be ensured. This assembly technique is easy and convenient, with greater dependable and solid connection power, and may withstand vibration and impact in the course of the excavation method of enamel.