What’s special about the material composition ratio of forged bucket teeth?

The special features of forged bucket teeth in material composition ratio are mainly reflected in the following aspects:
Selection of alloy elements: This is a commonly used forged bucket tooth material, which contains a high proportion of manganese. Manganese element can significantly improve the strength, toughness and wear resistance of steel, allowing the bucket teeth to maintain good performance under heavy load and high-intensity working conditions. As another common forged bucket tooth material, 30CrMnSi steel contains a specific proportion of alloy elements. Among them, the carbon content is between 0.27-0.34%, which is used to increase the hardness and strength of the steel; the manganese content is between 0.90-1.20%, which is used to improve the strength, toughness and wear resistance of the steel; the silicon content is between The chromium content is between 0.17-0.37%, which helps to improve the corrosion resistance of steel; the chromium content is between 0.80-1.10%, which can increase the hardness, wear resistance and corrosion resistance of steel.
Reasonable impurity control: The content of harmful impurities such as sulfur (S) and phosphorus (P) is also strictly controlled in the forged bucket tooth materials. For example, in 30CrMnSi steel, the contents of sulfur and phosphorus are limited to ≤0.035% to reduce their adverse effects on the processing performance, welding performance, plasticity and toughness of the steel.
Special alloy design: Some special forged bucket tooth materials, such as multi-element alloy cast steel bucket teeth, may contain a variety of alloy elements such as C, Cr, Mn, Si, Mo, Ni, Ti and rare earth elements Re, etc. The content of these elements Combinations and proportions are carefully designed to achieve specific performance requirements such as tensile strength, hardness, hardenability and impact toughness.
Enhanced wear resistance: The material design of forged bucket teeth pays special attention to wear resistance. By adding specific alloying elements and optimizing the material's heat treatment process, the wear resistance of the bucket teeth can be significantly improved, thereby extending their service life.
To sum up, the special features of forged bucket teeth in material composition ratio are mainly reflected in the selection of alloy elements, reasonable impurity control, special alloy design and wear resistance enhancement. These characteristics make forged bucket teeth perform well in engineering machinery, mining machinery and other fields, and can withstand the test of heavy loads and high-intensity working conditions.